2. Carry the work to the table.
3. Place the work on the table.
4. Put on the apron.
5. Arrange the work on the table so the mat is in the center front of the table. The objects to be used should be placed in order of their use from left to right. Place the basket in the upper right corner of the table out of the way of the work.
6. Pick up caster and go to the source of polish to get a small amount.
7. Apply polish with applicator as done in wood polishing.
8. Pick up the timer and observe where the sand is.
9. Turn the timer over and set it on the table and say, "We must wait". Observe the sand flowing through the timer.
10. Observe that the polish dried while waiting.
11. With the polishing cloth wrapped in fingers or a polishing mitt, remove the polish using a circular motion, starting at the top and working from left to right and from top to bottom.
12. Observe the black tarnish on the cloth.
13. Observe the shiny object.
14. Clean excess polish out of the caster with the cloth or mitt.
15. Take used Q-tip to the waste basket and discard.
16. Check table and mat for spills, cleaning if necessary
17. Put dirty cloth in proper place.
18. Get clean supplies for the basket.
19. Place all objects in the basket in an orderly fashion.
20. Remove apron and fold it.
21. Place apron in the basket on top of the other objects.
22. Return object, mat and baskets to proper places on the shelf.
2. Polish on mat or table where finished.
3. Arrangement of materials when finished.
2. Seeing the difference between cleaned and tarnished areas.
3. Seeing polishing cloth get back
2. Preparation for writing.